Cothi Rustic
Table and Benches, photo 1 of 5
Dining Tables

Table and Benches

From £625

Available in 5 sizes · 6 wax finishes

No. of benches Choose one
Table and Bench Length Choose oneSize guide
Legs Choose one
Wax finish Choose one

From

£625 – £1,120

  • Free mainland UK delivery within 10 working days
  • 30-day returns on unused items
  • Handcrafted from reclaimed and sustainably sourced timber
About the Table and Benches

Table and benches together, matched in length, legs and finish. 100cm to two metres, with one bench or two, on an A, X or square frame. At home indoors or out.

Size guide
Table and bench width, height and lengthFrom the end80cm wide40cm wide76cm43cmTableBenchFrom the side100, 120, 160, 180 or 200cm longTable and benches are always the same length
Leg styles
Leg styles, seen from the end of the tableA-frameX-frameSquare frame
Assembly

Comes with

Your chosen legs · Metal strips · Screws

What you’ll need

Tape measure · Pencil · Drill · Screwdriver

  1. 1.

    Place the planks on the floor, with the preferred top sides facing down, using a straight edge to align them.

  2. 2.

    The planks are held together by a metal strip. The exact placement of these metal strips is up to you, but we’d recommend setting them at least 35cm in from each end of the plank.

  3. 3.

    Measure the desired distance in from the end of each of the outer planks and mark with a pencil.

  4. 4.

    Align one of the metal strips with these markings and drill pilot holes along the length of the strip.

  5. 5.

    Screw the screws into each hole.

  6. 6.

    Repeat steps 3 to 5 for the second metal strip on the other end.

  7. 7.

    The leg placement is up to you, but make sure frame legs are parallel to the metal strips. For hairpin legs, we recommend 5cm in from the edge of the planks.

  8. 8.

    Position the legs and drill pilot holes for each of the screw points.

  9. 9.

    Screw the screws into each hole.

Delivery and care

Delivery is free to mainland UK within 10 working days. Furniture travels by DPD or Parcelforce, who will contact you with a delivery date and tracking number.

Arrives flat-packed to reach you safely, and usually takes 15 to 20 minutes to put together. We don’t pre-drill the holes for the legs, so you can set them up to suit your space, and all the screws you need are included.

Every piece is finished in BRIWAX, a blend of natural beeswax and carnauba wax that gives a durable, water-resistant surface. Everything is made to order, so the grain and colour of your piece will vary a little from the photos.

To care for it, wipe with a clean, dry, soft cloth, avoid harsh cleaning products, and don’t leave standing water on the wood. A coat of clear wax once a year keeps the finish looking new.

Return any unused item in its original packaging within 30 days for a full refund; return postage is paid by you. Delivery and returns